Skip to main content
#
Johnny Walker Guitars

This new handmade Walker concert model classical, #649, was built from ribbon striped Honduras mahogany, back and sides, with an Engelmann spruce top.  The fret board is ebony.  The frets are stainless steel, 21 in number.  The inlaid rosette is commercial quality.  The tuners are Gotoh standard.  It has an epoxy/carbon fiber bar under the fret board for additional stiffness.  The neck is ribbon striped mahogany and extends into the body in the Spanish style of building guitars.  The bridge is Claro walnut of the 12 hole tie block style.  The nut and saddle are bone and fully intoned, so it plays in tune.  The scale length is 650 MM and the nut width is 52 MM.  The finish is French polish.

This guitar is loud and sweet sounding and is priced at $2,800 which includes a Humicase and shipping to your US location.


This new handmade Walker concert model classical, #653, was built from curly black walnut, back and sides, with an Engelmann spruce top in 2018.  The fret board is katalox, also known as Mexican ebony.  The frets are stainless steel, 19 in number.  The inlaid rosette is custom and is spalted maple.  The tuners are Gotoh standard.  It has an epoxy/carbon fiber bar under the fret board for additional stiffness.  The neck is Spanish cedar and extends into the body in the Spanish style of building guitars.  The bridge is Claro walnut of the 12 hole tie block style.  The nut and saddle are bone and fully intoned, so it plays in tune.  The scale length is 650 MM and the nut width is 52 MM.  The finish is French polish.  More pictures are available upon request.  This guitar is loud and sweet sounding and is priced at $2,500 which includes a Humicase and shipping to your US location.

johnny walker guitars
Bartlesville, OK  74006
Email: walk53walk@aol.com
cell: 1 918 327 4369